25.13.3 Adjusting radio settings
About this task
The following describes how to optimise the communication between the
dental unit and the wireless foot control.
Steps
1. Press Program.
2. Press Foot control.
The
Wireless foot control
window opens.
3. Open the
Radio
tab.
NOTE
If the Foot control channel and Transmitter power fields are inactive, you
must press the foot control handle to enable the adjusting of the settings.
4. Select the foot control channel.
You can freely choose between the channels 1 and 16, but, to minimise
radio signal interference, no two foot controls within 10 meters of each
other should have the same channel.
25 Programming
User's manual Planmeca Compact i 205
To Next Page
Loading...
Need help?
General
