Planmeca Compact i5 - Adjusting Camera Settings from Dental Unit

The Solanna Vision window gives you access to the Solanna Vision controls.
When the Solanna Vision dental unit window is not open, the operating light,
instruments, dental unit and chair can be used normally, also when
streaming or recording is running in the background.
Press OK to close the Solanna Vision dental unit window.
22.7.2 Adjusting camera settings from dental unit
22.7.2.1 Selecting camera and zoom level
About this task
Planmeca Solanna Vision has two cameras. Select which camera you want
to use.
Steps
1. Open the Solanna Vision window in the dental unit.
For instructions, see section "Activating camera from dental unit" on
page 128.
2. Select the camera by pressing the corresponding camera button.
Right camera (as seen from behind the camera)
selected. Press to unselect.
22 Operating dental unit
User's manual Planmeca Compact i 129