20.2.2 Extended vs. traditional view
In the
User settings
window, select whether you want to view the automatic
positions in a traditional or an extended view.
• Extended view
Includes the automatic positions A, B, C, D and rinsing position in list-
format and allows renaming of positions A - D. For instructions, see
section "Extended view" on page 178.
To take the extended view into use, check the checkbox next to
Automatic positions extended
in the
User settings
window.
• Traditional view
Includes the automatic positions A, B, C, D and rinsing position.
To take the traditional view into use, uncheck the checkbox next to
Automatic positions extended
in the
User settings
window.
20.2.3 Selecting automatic position
Extended view
Control panel: To move the chair to a preprogrammed position, first press
the Chair positions button in the main window. Then, in the list that opens,
select an automatic position by pressing it.
20 Operating patient chair
106 Planmeca Compact i User's manual
To Next Page
Loading...
