3. Open the
Configuration
tab.
4. The
Foot control serial no
field displays the current foot control’s serial
number. If you want to change the foot control, press Edit.
NOTE
On the foot control, the serial number can be found on its underside.
The
Bind foot control
window opens.
5. Press and hold down the handle of the foot control that you want to pair
your dental unit with to select it.
The selected foot control is shown with a black font on the list (marked
with arrow in the picture below).
25 Programming
202 Planmeca Compact i User's manual
To Next Page
Loading...
Need help?
General
