MAINTENANCE
2.34
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts to the proper
torque listed in the table.
CAUTION:
If wheels are improperly installed it could affect
vehicle handling and tire wear. Be sure to properly
torque and install all wheel nuts.
TIRE PRESSURE
Tire Pressure Inspection (PSI - Cold)
Front Rear
4 3
TIRE INSPECTION
WARNING
OperatinganATV withworntireswillincrease
the possibility ofthevehicle skiddingandpos-
sible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
measures 1/8″ (.3 cm) or less.
CAUTION:
G Maintain proper tire pressure. Refer
to the warning tire pressure decal
applied to the vehicle.
G ImpropertireinflationmayaffectATV
maneuverability.
G When replacing a tire always use
original equipment size and type.
G Theuse of non-standard sizeor type
tires may affect ATV handling.
Tire Tread Depth
Always replace tir es when t read dept h is worn to
1/8″ (3 mm) or less.
T read
Depth 1/8I (3 mm)
FRAME, NUTS, BOLTS,
F
ASTENERS
Periodically inspect the tightness of all fasteners in
accordance with the maintenance schedule. Check
that all cotter pins are in place. Refer to specific
fastener torques listed in each chapter .
PartShark.com
877-999-5686
To Next Page
Loading...
Need help?
General
