FINAL DRIVE
7.4
FRONT HUB ASSEMBLY
1. Insert spacer (D), small endfacing, intobackside
of hub. Drive or press one new bearing (A) into
hub (B) using a bearing driver (C).
CAUTION: Do not drive on the inner race of the
bearing.
B
D
E
Seal
Premium All-Season Grease
(PN 2871322) (3 oz. Tube)
(PN 2871423) (14 oz. Tube)
2. Coat bearing spacer (D) with grease and install
into hub (B). Drive or press the other bearing (E)
into hub until seated against spacer.
A
B
C
3. Install seal into hub backside (numbers facing
out) untilflushwithendofseal bore.Applygrease
to the seal lip before mounting to spindle.
Seal
FRONT HUB INSTALLATION
1. Inspect spindle seal and bearing surface for wear
or damage. Apply anti--seize compound to the
spindle area.
Inspect and Apply Anti--Seize
2. Install hub on spindle.
PartShark.com
877-999-5686
To Next Page
Loading...
Need help?
General
