To Next Page

To Previous Page

5.29

9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual

5. Press down on the top of the spider assembly,

pushing the spider onto the shaft. Remove snap ring

and slowly release the assembly.

6. Remove the spider assembly and spring

NOTE: Spring is compression only and has no

torsional wind.

7. Remove the inside spider plate

and spider

dampener

. Inspect the spider dampener for wear

and replace if needed.

8. Remove the E-clips

, washers

, and the clutch

rollers

. Inspect the rollers for wear; replace if worn.

9. Remove the clutch assembly from the holding tool.

10. Press out the spring pins

in the inner sheave.

PVT SYSTEM

Polaris RZR XP 1000 Service Manual

Other manuals for Polaris RZR XP 1000