The Log Out screen displays with a confirmation message.
2. Select Yes.
Your personal profile is no longer accessible, and either the User Login screen displays for the
next user or the default profile displays.
Change Your Login Password
You can change your login password from any phone on your network.
Procedure
1. Log in to a phone on your network.
2. Go to Settings > Features > User Login > Change User Login Password.
3. On the Change User Login Password screen, enter your old and new password information and
select Enter.
Your password changes. The next time you log in to a phone, you must enter your new password.
Locking Your Poly Trio Phone
If your system administrator has set up the system to lock when it isn’t in use, you must unlock it before
you can use the system.
Your system administrator provides you with a user password that you can use to unlock Poly Trio
systems.
With the system locked, you can do the following:
• Place outgoing calls only to emergency and authorized numbers.
• Enter a password to answer incoming calls.
Related Links
Place a Call from a Locked Phone on page 31
Answer a Call on a Locked Phone on page 35
Lock the Phone
You can lock a phone so that only authorized personnel can use it. Some features are available for users
with a valid user password.
Procedure
1. Go to Settings > Basic > Lock Phone.
2. On the Lock Phone screen, select either of the following options:
• Allowing ringing when locked - Incoming calls ring on the system, and you can answer
calls by entering a user password.
• DND when locked - Do Not Disturb applies to all lines, and the system doesn’t ring for
incoming calls.
3. Select Lock.
Logging In to and Locking the System
27
To Next Page
Loading...
