Note: When you answer an incoming call with content sharing in progress while you’re sharing content
wirelessly on a Windows or Android device, your content stops showing. The content from the
connected call displays instead. After you end the call, you can start sharing content again locally
from your Windows or Android device.
Poly Trio systems support the following Android and Windows devices:
• Microsoft Surface 3 Pro and Surface 4 Pro
• Samsung Galaxy smartphones and tablets with software Android 4.2 or later
• Devices with Miracast support with software 4.2 or later
• Microsoft Windows 10 devices with Miracast support
Share Content with an HDMI or VGA Connection
You can share content from a device that’s connected to a paired Trio VisualPro or RealPresence Group
Series system with an HDMI or VGA cable.
Procedure
1. Connect your device to the paired system with an HDMI or VGA cable.
2. Do one of the following on the local interface:
• Out of a call: Select Content > Show Content.
• In a call: Select Show Content.
Share Content Automatically When Idle
You can share content using a Poly Trio VisualPro or RealPresence Group Series system while thePoly
Trio system is idle. After you end the call and the Poly Trio system is idle, the content displays
automatically.
Procedure
1. Connect your device to the Poly Trio VisualPro or RealPresence Group Series system with an
HDMI cable.
The content automatically displays on the monitor when the Poly Trio system is idle.
2. Select Stop Sharing to stop sharing the content.
The content resumes automatically after a period of idle time set by your administrator.
Share Content using the Polycom Content App
With the Polycom Content app, you can connect your device to the Poly Trio system with a connected
monitor and share content in a video call or during in-room meetings.
Procedure
1. In the Polycom Content app, select Screen Sharing and choose one of the following options:
Sharing Content on Poly Trio Systems
60
To Next Page
Loading...
Need help?
General
