Poly Trio Series - Manage a Call from the Calls Screen

Figure 11: Multiple calls on the Calls screen
Figure 12: Multiple calls on the Trio 8300 Calls screen
Manage a Call from the Calls Screen
From the Calls screen, you can manage a call by holding, resuming, or transferring the call.
Procedure
1. Select a call.
2. Do one of the following:
• Select Hold to place an active call on hold.
• Select Resume to make a held call active.
• Select Hang Up to end a call with a contact. You can end active calls only, so resume the
held call first before ending it.
Audio Calls
40