Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 241
Parameter
Permitted Values
Default
call.lastCallReturnString
1
string of maximum length 32
*69
The string sent to the server when the user selects the last call return action. The string is usually a star code.
call.localConferenceCallHold
1
0 or 1
0
If set to 0, a hold will happen for all legs when conference is put on hold.
If set to 1, only the host is out of the conference, all other parties in conference continue to talk.
call.localConferenceEnabled
1
0 or 1
0
If set to 0, the Conference and Join soft keys do not display during an active call and you cannot establish
conferences on the phone.
If set to 1, the Conference and Join soft keys display during an active call and you can establish conferences on
the phone.
call.missedCallTracking.x.enabled
1
0 or 1
1
If set to 1, missed call tracking is enabled.
If call.missedCallTracking.x.enabled is set to 0, then missedCall counter is not updated regardless of
what call.serverMissedCalls.x.enabled is set to (and regardless of how the server is configured).
There is no Missed Call List provided under Settings > Features of the phone.
If call.missedCallTracking.x.enabled is set to 1 and call.serverMissedCalls.x.enabled is set to 0, then
the number of missedCall counter is incremented regardless of how the server is configured.
If call.missedCallTracking.x.enabled is set to 1 and call.serverMissedCalls.x.enabled is set
to 1, then the handling of missedCalls depends on how the server is configured.
call.offeringTimeOut
1
positive integer
60
Specify a time in seconds that an incoming call will ring before the call is dropped, 0=infinite.
Note: The call diversion, no answer feature will take precedence over this feature if enabled.
call.parkedCallRetrieveString
1
star code
Null
The star code used to initiate retrieval of a parked call.
call.rejectBusyOnDnd
1
0 or 1
1
If 1, and DND is turned on, the phone rejects incoming calls with a busy signal. If set to 0, and DND is turned on,
the phone gives a visual alert of incoming calls and no audio ringtone alert.
Note: This parameter does not apply to shared lines since not all users may want DND enabled.
call.ringBackTimeOut
1
positive integer
60
Specify a time in seconds to allow an outgoing call to remain in the ringback state before dropping the call,
0=infinite.
call.serverMissedCall.x.enabled
1
0 or 1
0
If 0, all missed-call events will increment the counter. If set to 1, only missed-call events sent by the server will
increment the counter. Note: This feature is supported with the BroadSoft
®
Synergy call server only (previously
known as Sylantro).
call.shared.disableDivert
1
0 or 1
1
If set to 1, the diversion feature for shared lines is disabled. Note: This feature is disabled on most call servers.

Polycom CX5500 Specifications

General

Field of View	360 degrees
Camera Resolution	1920 x 1080
Microphone Range	12 feet (3.6 meters)
Connectivity	USB
Audio Bandwidth	160 Hz to 22 kHz
Speaker	Built-in speaker
Compatibility	Microsoft Lync, Microsoft Skype for Business