PowerMetrix PowerMaster 3 Series - Page 27

10-140-0752 SR752 Clamp-On Probe
These set of clamp-on probes are normally used for class 200, 400, and 600 self-contained meter
testing or CT ratio testing.
Range
0.001 – 1200A
Max Voltage
600V
Opening:
2.25” (57mm)
Accuracy:
TBD
10-140-1036 36” Flexible Current Probe 3000A
These probes are normally used for used for class 200, 400, and 600 self-contained meter testing
or CT ratio testing. Other current ranges available upon request.
Range
5 – 3000A
Max Voltage
600V
Opening:
N/A
Accuracy:
TBD
10-140-1048 48” Flexible Current Probe 3000A
These probes are normally used for used for class 200, 400, and 600 self-contained meter testing
or CT ratio testing. Other current ranges available upon request.
Range
5 – 3000A
Max Voltage
600V
Opening:
N/A
Accuracy:
TBD
10-140-30K48 48” Flexible Current Probe 30,000A
These probes are normally used for used for class 200, 400, and 600 self-contained meter testing
or CT ratio testing. Other current ranges available upon request.
Range
5 – 30,000A
Max Voltage
600V
Opening:
N/A
Accuracy:
TBD
10-140-8016 Amp LiteWire Probe
These probes are normally used for used for CT ratio testing. They can be used for high voltage
(> 600V) or low voltage (< 600V) installations.
Range
1 – 2000A
Max Voltage
150,000V
Opening:
N/A
Accuracy:
TBD
Rev 1.5 27