10-140-8014 Volt LiteWire Probe
These probes are used for used for PT ratio testing. They can measure phase to ground, or
phase to phase measurements.
Accuracy: ±2% of reading
CURRENT & VOLTAGE DIRECT LEADS
10-340-3103 3-Phase Voltage Cable
Terminated with banana jacks to allow user customization. They are rated at 350/600Vac max.
10-340-3101 3-Phase Test Switch Current Direct Probes
These probes are used for insertion of a test switch. They are rated at 350/600Vac, 0.1-20A
max.
10-340-3102 3-Phase Current Lead Set (terminated with banana jacks)
This lead set is used for direct connections to the current circuit of the meter. Banana jack
termination allows user customization of leads.
CABLES & ADAPTERS
10-340-3100 3-Phase Probe Adapter Cable
Used for connection to all current and voltage probes
10-340-0026 15 Foot Probe Extension Cable
This cable is terminated with 8-pin connectors. Multiple cables can be connected serially for
longer lengths with a maximum length of 45 feet. Any type of probe can be used with this
extension cable.
10-340-0025 BNC to PowerMaster Probe Adapter Cable
For connection to High Voltage Amp or Volt LiteWire probe
75-700-2001 40' Fiber Optic Replacement Cable
For High Voltage Amp and Volt LiteWire Probes
SPARE PARTS
29-100-3100A Li-Ion Battery Pack
Replaceable PTO1661 10.8V, 3.07AHr Lithium-Ion (Li-Ion) rechargeable battery pack
Z3302-CASE Hard Carrying Case for PowerMaster Unit and Accessories
Rugged, watertight case. Includes fitted foam insert.
Rev 1.5 28
To Next Page
Loading...
Need help?
General