17-13
Powerscreen® XA750S
7
10
9
10
11
12
12
14
14
10
EN
10. Fit the handrails into position on the
maintenance platform and secure with the
fasterers.
11. Make sure the spring tension on the gate is
correctly adjusted to be self closing.
7. Prepare the other side ladders for use in a
similar manner.
8. Proceed to the right hand side maintenance
platform.
9. Place the ladder support bracket into the
working position and secure.
12. Using suitable lifting equipment, t the ladder
using the securing pins provided.
13. Carefully remove the transport chain and fold
the ladder down into the working position.
14. Fit the securing bolts at the pivot points to
secure the ladder into position.
To Next Page
Loading...