Powerscreen XA750S - Engine Power Transmission

48-2
 03
Servicing Clutch type ‘G’
Engine Power Transmission
Identi󰘰cation
1. The clutch can be identi󰘰ed by the name PT
Tech HPTO 12 on the housing.
Servicing - Clutch
2. The bearing in this type of clutch is lubricated by
oil, serviced via the plant system.
Servicing - Inspection
3. Every 500 hours of operation, check the
tightness of clutch securing bolts and hydraulic
connections.
4. At every 5000 hours of operation, the clutch
must be inspected and serviced. Contact your
local Powerscreen® dealer or Powerscreen®
technical support.
5. If the clutch is allowed to operate beyond 5000
hours without servicing, the drive torque may
reduce rapidly and possibly damage the clutch.