Powerscreen XA750S - Adjusting Track Tension

47-4
3
Servicing of Tracks
Adjusting Track Tension
n WARNING
‘GREASE UNDER HIGH PRESSURE’
SKIN INJECTION
HAZARD
n DANGER
Refer to Safety Notices Section for relevant
warning and procedure
1. Observe all Safety Warnings.
2. Close down the plant and implement the
Lockout Procedure.
3. Locate the access aperture on the side of the
track frame and remove the cover, where 󰘰tted,
to reveal the relief valve inside.
n WARNING
Refer to Safety Notices Section for relevant
warning and procedure
LOCKOUT
PLANT