Powerscreen XA750S - Dust Suppression Water Spray System; [If Fitted]

25-2
Dust Suppression [if 󰘰tted]
1. The plant dust suppression is a plain water
spray system with one inlet feeding separate
circuits. The customer or user should provide
the clean pressurised water supply.
2. The layout of the valves and pipe work varies on
di󰘯erent type of plant.
3. Each circuit consists of spray bars each 󰘰tted
with atomiser nozzles.
4. These are normally located in the following
areas:-
5 The total 󰘱ow requirement for the system is
25litres/min (6.6US gall/min) at a pressure of
2.8bar (42lbf/in²).
Dust Suppression Water Spray System [if 󰘰tted]
Crusher or impactor discharge area.
Product conveyor discharge.
Crusher feed,.
Dirt conveyor, [not all plants].