03-2
33
2006/42/EC
General Information
1. The machine has been manufactured with
quality materials and assembled and tested
with care.
2. Close attention has been paid in assembly, tests
and nal inspection.
3. We are condent that the machine will give you
every satisfaction over a long period.
4. The machine is simple to operate and adjust.
Expert assistance is seldom required, provided
that ordinary care is exercised in daily use.
5. The machine has been built in accordance with
current standards and recognised safety rules.
6. It is designed to be reliable, ecient and safe
when used and maintained in accordance with
the instructions given in this manual.
General
8. This machine is in conformity with the provisions
of the current EC Machinery Directive.
EC Conformity
7. When the machine is new and rst
commissioned, refer to initial checks - running
in.
To Next Page
Loading...