01-4
03
Introduction to the Machine
Designated Use of Machine
10. Tracked crusher machines are designed
exclusively as a self-contained mobile unit for
crushing materials in a wide range of quarry
applications, within the parameters set out and
described within this manual. It is also possible
for some models to be used in demolition and
recycling applications.
11. The machine is intended to be used only in
above ground open air environments. Use of
the machine in any other way is contrary to its
intended use.
n WARNING
This machine is designed for stone
crushing applications. It is vitally important
that large pieces of steel or similar
uncrushable objects are not allowed to
enter the crushing chamber as severe
damage and injury may occur. The
machine is not designed to accept large
pieces of steel or other uncrushable
objects such as bucket teeth from a
loading shovel.
12. Operating the machine outside it’s
recommended range of applications and
operating parameters shown will result in a loss
of guarantee and the manufacturer/supplier
cannot be held liable for any damage resulting
from such use. The risk of such misuse lies
entirely with the user.
NOTICE
If you have any doubts about any aspect
of the machine’s capability or servicing
procedures, you must consult your local
Powerscreen® dealer or Powerscreen®
technical support.
To Next Page
Loading...