Powerscreen XA750S - Jaw Crusher Lubrication

44-2
 42
 41
 03
Servicing Jaw Crusher
n WARNING
Refer to Safety Notices Section for relevant
warning and procedure
LOCKOUT PLANT
1. The lubrication of the eccentric shaft and jaw
bearings varies in frequency and amount of
grease depending on the ambient temperature.
It is important that the crusher eccentric shaft
is greased at the correct intervals, refer to
servicing - lubrication.
Jaw Crusher Lubrication
2. Use the correct grease only, not a mixture, refer
to lubricant and 󰘱uid speci󰘰cations.
3. Contact your local Powerscreen® dealer or
Powerscreen® Technical Support department
for advice if in doubt.
4. Access to the eccentric shaft is from the
maintenance platform.
5. Lubricate the jaw bearing at the grease nipples.
6. Lubricate the shaft bearings at the grease
nipples.