Powerscreen XA750S - Preparing for Loading [Engine stopped]

10-3
Powerscreen® XA750S
 04
 <--
10
9
EN
6. Before loading, the plant must be prepared for
transportation, refer to initial preparation.
7. Refer to speci󰘰cation and plant information for
travel dimensions.
8. Observe all safety warnings.
n WARNING
Refer to Safety Notices Section for relevant
warning and procedure
FALLING
HAZARD
Preparing for Loading [Engine stopped]
9. Remove the wedges at each rear corner of the
hopper.
10. Remove two wedges at each hopper side, to
prepare the hopper for lowering.