Powerscreen XA750S - Loading on to Trailer

11-3
 13
 04
 15
 12
n/min
17
Unload & Load - Transport Trailer
EN
Loading on to Trailer
11. Before loading, the machine must be prepared
for transport, refer to preparing to move
machine.
19. Stop the engine, see engine stop, unless
required further.
18. Load the machine slowly on the trailer,
manoeuvring with the tracks, using the umbilical
control or the remote radio control, if 󰘰tted, see
moving the plant.
16. Start the engine, see engine starting.
12. Check that the travelling dimensions and
weight, when loaded, will be within the
regulation limits, refer to speci󰘰cation and
information and plate 󰘰xed on the machine.
13. Observe all safety warnings.
14. Ensure all loose items are carefully stowed and
secured if these are to be transported on the
machine.
15. Make sure suitable ramps are positioned at the
end of the trailer for loading.
17. Set the engine at the slowest speed, if
applicable. Some machines have automatic
engine speed control.