02-9
Safety Hazards
EN
Safety Instructions Governing Specic Operational Phases
Standard Operation
4. Take the necessary precautions to ensure that
the machine is used only when in a safe and
reliable state.
5. Operate the machine only for it’s designed
purpose and only if all guarding, protective and
safety orientated devices, emergency shut-
o equipment, sound proong elements and
exhausts, are in all place and fully functional.
6. Before starting the engine ensure it is safe to do
so.
7. In the event of material blockage, any
malfunction or operational diculty, stop the
machine immediately and lockout. Have any
defects rectied immediately.
8. In-running nip points on moving machinery can
cause serious injury or even death.
9. Do not reach into unguarded machinery. Your
arm could be pulled in and amputated.
10. Switch o and lockout the machine before
removing, for adjustment purposes, any safety
devices or guarding.
11. NEVER leave the machine unattended whilst it
is in operation.
Special Work In Conjunction with
Utilisation of the Plant
Maintenance and Repairs During Operation;
Disposal of Parts and Consumable items
12. Observe the adjusting, maintenance and
intervals set out in these operating instructions,
except where:
Switching o the engine and remove the
ignition key.
Implementing the lockout procedure.
Attaching warning signs to the machine in
appropriate positions.
Warning horn/light/gauge or indicator calls
for immediate action.
Adverse conditions necessitate more
frequent servicing.
13. Observe information on the replacement of
parts and equipment. These activities may be
executed by skilled personnel only.
14. When the machine is completely shutdown
for maintenance and repair work, it must be
secured against inadvertent starting by:
To Next Page
Loading...