Powerscreen XA750S - Finish Manoeuvring the Machine

12-10
 17
 15
1
5
ESC
0
F1
2
F1
Moving the Machine [Fitted with ‘860’ controls]
1. When the machine is in the correct position,
press the horn button to disengage the tracks
which will turn the safety warning horn o󰘯.
2. Set track operation mode o󰘯 by esc, exit, ‘0’ or
crush, depending on the type of controls 󰘰tted.
3. If crushing is to commence, see preparing to
crush.
5. If not required further, switch o󰘯 the radio
remote control, push in the stop button. This
will also conserve the battery charge.
Finish Manoeuvring the Machine
4. If not required further, switch o󰘯 the engine, see
engine stop.