Powerscreen XA750S - Lubrication

46-8
 41
 42
4
4
5
5
6
6
Servicing Conveyors
1. Lubricate the product conveyor tail section
pivots, where 󰘰tted and dirt conveyor, if 󰘰tted,
pivots.
4. Grease the head and tail drum bearings of
the conveyors as speci󰘰ed in the servicing -
lubrication schedule.
5. The grease nipples for some conveyors are
place in more convenient positions remotely
from the bearing.
6. Where the machine does not have a vibrating
feeder but includes a feed conveyor with an
oil lubricated speed reduction gearbox inside
the head drum, refer to the machine speci󰘰c
schedule in Servicing - Lubrication.
Lubrication
Maximum gearbox oil temperature 90°C (194°F).
2. Refer to the machine speci󰘰c schedule in
servicing - lubrication.
3. Refer to lubricant and 󰘱uid speci󰘰cations for the
correct lubricants.