12-6
Moving the Machine [Fitted with ‘860’ controls]
Manoeuvring the Machine
n WARNING
Prior to manoeuvring the machine, the
tracks must be free of obstructions,
including crushed material and nes. The
tracks must be correctly tensioned before
moving.
Do not push or tow the plant. Failure
to observe this warning could result in
danger to persons and damage to the
machine which may invalidate warranty.
1. The machine cannot be manoeuvred when
mode is set to crush or 0.
2. The alarm sounds continuously whilst the
machine is being manoeuvred.
n DANGER
DO NOT stand on any of the maintenance
platforms or ladders of the machine whilst
it is being manoeuvred.
Ensure all personnel are clear of the
machine before manoeuvring.
When manoeuvring the machine make
sure you stand well clear but are in a
position to have all-round vision to see any
obstacles or dangers that may lie ahead
such as personnel, overhead cables,
ditches, unsafe roadways etc.
To Next Page
Loading...