12-5
14
6
F3
F4
5
F1
-->
Moving the Machine [Fitted with ‘860’ controls]
EN
10. Keep the internal re-chargable battery fully
charged, see radio remote control.
5. Set track control mode to radio, referring to icon
and appropriate control, as machines vary.
6. Press the horn button to sound the alarm. The
missing beep or break in the alarm after ve
seconds indicates that the tracks are ready for
use. The alarm will continue to sound.
7. To move the machine, refer to manoeuvring the
machine.
8. The radio control has a safety function that
prevents any action from involuntary cutting-in
when it is switched on.
9. The radio control will not start if a button is
pressed or stuck prior to the missing beep in
the pre-start warning.
To Next Page
Loading...