25-3
6
8
7
6
8
7
Dust Suppression [if tted]
EN
6. The system requires a clean pressurised plain
water supply to the connection point.
7. Shut-o valves are provided for each spray bar
circuit.
9. All nozzles should be kept free of dirt and
blockages.
10. Each nozzle should be checked every time the
dust suppression is switched on.
NOTICE
Drain water from system when not in use,
if there is a possibility of freezing.
8. The water can be drained from the system
using the drain valves located below the inlet.
This is particularly important when there is the
likelihood of the system freezing.
To Next Page
Loading...