51-2
24
42
41
Servicing Hydraulic Systems
All hydraulic functions are powered by pumps
driven by the engine.
n DANGER
THIS IS A HIGH PRESSURE SYSTEM.
Never carry out any maintenance work
without ensuring the hydraulic system is
locked out and depressurised. Check the
pressure gauges and control screen, if
tted, to view the current system pressure.
Open the bleed valve, if tted, until all
pressure is relieved then close the valve.
Do not amend the hydraulic system. In
the event of any problems these should
only be dealt with by suitably experienced
and qualied engineers.
General
Daily plant checks
Lubrication - checks - specications.
ONLY USE A RECOMMENDED FLUID.
The hydraulic uid reservoir together with
associated equipment must be maintained
in accordance with the set level and in the
schedules and types, refer to:
SKIN INJECTION
HAZARD
n DANGER
Refer to Safety Notices Section for relevant
warning and procedure
Note:- All relief valve pressures are factory set
and should not be adjusted.
To Next Page
Loading...