04-6
Specication and Plant Information
Maintenance Platforms
18. Steel grid maintenance platforms, tted with
double row handrails and access ladders, are
provided for daily checks and servicing of the
crusher and power pack
Controls
19. Controls are tted on the plant for setting up
and preparing the plant for transport, adjusting
crusher settings, feeder and conveyors. Engine
and plant controls are in a lockable box.
20. An umbilical control unit is provided for
operating the tracks to move the plant.
21. Emergency stop buttons are provided on each
side of the plant and on the umbilical control.
Guards
22. Wire mesh or sheet metal guards are provided
for all drives, ywheels, pulleys, couplings,
gears and vee belts.
23. The guards provided are designed and
manufactured to ensure so far as reasonably
practicable that the machinery and plant on
which they are tted can be operated safely
and without risk to health when properly
used. However, it cannot guaranteed that the
guards will meet the requirements laid down by
individual inspectors.
n WARNING
Refer to Safety Notices Section for relevant
warning and procedure
FLYING MATERIAL
HAZARD ON
MAINTENANCE
PLATFORMS
To Next Page
Loading...