10-9
Powerscreen® XA750S
7
EN
7. When the dirt conveyor is in the transport
position place the securing pin into place and t
the securing clip.
NOTICE
During folding of the conveyor ensure that
the hydraulic hoses and conveyor belt are
not entangled with any part of the plant.
Failure in releasing any tucks/folds in the
dirt conveyor belt may result in ripping or
tearing the belt.
6. When folding the dirt conveyor, observe the
conveyor belt, particularly in the pivot point
area. If any folding or tucking of the belt
begins to occur, Stop folding the conveyor and
carefully pull the tuck/fold out of the belt and
then resume the folding process.
To Next Page
Loading...