ProMinent DULCOMETER diaLog DACb - 12 Setting the [Limit values]; Function of the limit values

12 Setting the [Limit values]
n User qualification: trained user, see Ä Chapter 3.4 ‘User qualification’ on page 24
Continuous display ➨ ➨ or [Limit values] ➨ [Limit values]
Measuring channel settings
This descriptions of [Channel 1] apply correspondingly to the settings in all other measuring
channels. The procedure for entering the settings for the channel in question is identical,
however the parameters to be set may differ. Your attention is drawn to the differences,
which are also described.
Limit values
Limit value channel 1
A1011
4.1
Fig. 92: Setting the [Limit values]
12.1 Function of the limit values
The limit values are not related to the control setpoint.
The limit values are continuously compared with the measured value.
Setting the [Limit values]
138