DAC: DULCOMETER
®
, multi-parameter controller diaLog DACb
Communication interface
X none
A Modbus RTU, terminal
B Profibus DPV1, terminal
E LAN with web server, connection via M12 C-coded
G
PROFINET
®
(2xM12)
Data logger
0 no data logger
1 with data logger (SD card interface + SD card + card
reader)
Hardware extension
0 none
1 Protective RC circuit (relay)
Approvals
01 CE (Standard)
Certificates
0 none
Documentation language: The documentation is available in all the languages pre-set on the con‐
trollers. Other languages are available on request.
2.1 A complete measuring point
may comprise the following:
n Transmitter/Controller DAC (see identity
code)
n Bypass fitting: DGMa..., DLG III ...
n pH sensor (dependent upon the applica‐
tion)
n ORP sensor (dependent upon the applica‐
tion)
n e.g. chlorine, chlorine dioxide, chlorite,
bromine, dissolved oxygen sensor
n Transformer for pH or ORP (depending on
the set evaluation, pH [mA], ORP [mA])
n Sensor cable
Identity code
19
To Next Page
Loading...
Need help?
General
