ProMinent DULCOMETER - Page 102

Control
Disturbance variables
Channel 1 parameter set 1
metering lock
A0940
3.5
Parameter switch
Fig. 73: Continuous display ➨ ➨ or [Control] ➨ [Control]
pH [mV]
Type
Channel 1 parameter set 1
Control time control
A0949
3.1.9
System response
Setpoint
xp=
Add. Basic load
Ctrl output limitation
PID control
normal
7.00 pH
1.54 pH
0 %
100 %
Fig. 74: for the example of pH [mV]: Continuous display ➨ ➨ or [Control] ➨
[Control] ➨ or [Channel 1 parameter set 1] ➨ [Channel 1 parameter set 1]
Parameter level
1
Function Parameter
[Channel 1
parameter set 1]
[Type] none
P-control
PI control
PI control
[System response] Normal
Manual
With dead zone
[Setpoint] The adjustable range of the setpoint is speci‐
fied by the device.
Setting the [Control]
102