ProMinent DULCOMETER - 3 ID Code

3 ID Code
Device identification / Identity code
DULCOMETER
®
, Multi-parameter Controller diaLog DACa
D
A
C
a
Design
00
With ProMinent
®
logo
S0 With fitting kit for control cabinet
Operating voltage
6 90 ... 253 V, 48/63 Hz
Channel 1*
1 Measurement + control, 2 pumps, 2 control inputs, 2 mA outputs
Channel 2**
0 No second channel
2 Package 2: Interference variable (mA) or external setpoint via mA or
pH compensation for chlorine with pH control (all acting on channel
1). Additionally an mA output.
3 Package 3: 2nd measurement + control, additionally 2 pumps, 3 con‐
trol inputs, one mA output
4 Package 4: 2nd measurement + control, additionally 2 pumps, 3 con‐
trol inputs, one mA output, interference variable (mA or frequency),
pH compensation for chlorine
Software default settings
0 no default settings
1 Batch neutralisation 2 x pH measurements with 1-2-way con‐
troller and final inspection
2 Flow neutralisation 2 x pH measurements with 1-2-way con‐
troller, interference variable and final inspection
3 pH/ORP measurement/control (pH 2-way, ORP 1-way)
ID Code
15