ProMinent DULCOMETER - Setting [System Response]

11.2.3 Setting [System response]
Continuous display ➨
➨ or [Limit values] ➨ [Limit values] ➨ or
[Limit value channel 1] ➨ [Limit value channel 1] ➨ or [System response] ➨
[System response]
System response
Error messages
On
A1167
4.1.5.1
Hysteresis
Message delay
Control Stop with fault
Off
Fig. 89: Setting [System response]
Setting the [Limit values]
124