ProMinent DULCOMETER User Manual

2 Entries in the [Menu] display
Name of menu item Jump to chapter
[Measurement]
Ä Chapter 8 ‘Setting measured variables’ on page 52
[Limit values]
Ä Chapter 11 ‘Setting the [Limit values]’ on page 120
[Control]
Ä Chapter 10 ‘Setting the [Control]’ on page 101
[Calibration]
Ä Chapter 9 ‘Calibration’ on page 61
[Pumps]
Ä Chapter 12 ‘Setting the [Pumps]’ on page 125
[Relays]
Ä Chapter 13 ‘Setting the [Relays]’ on page 128
[Digital inputs]
Ä Chapter 14 ‘Setting [Digital inputs]’ on page 133
[mA-outputs]
Ä Chapter 15 ‘Setting the [mA outputs]’ on page 136
[Diagnostics]
Ä Chapter 17 ‘[Diagnostics]’ on page 146
[Service]
Ä Chapter 18 ‘[Service] ’ on page 157
[Setup]
Ä Chapter 19 ‘ Setting [Device setup]’ on page 158
Entries in the [Menu] display
14

ProMinent DULCOMETER Specifications

General

Protection Class	IP65
Measurement Parameters	pH, Conductivity, Temperature
Communication	Modbus
Power Supply	24 V DC or 100-240 V AC
Control Outputs	Relay, Analog (0/4-20 mA)
Control Functions	PID control
Input Signals	Analog (0/4-20 mA), Digital
Mounting	Wall-mounted, panel-mounted
Measurement Range pH	0-14 pH
Measurement Range Conductivity	0-2000 µS/cm