ProMinent DULCOMETER - Setting the [Limit values]

11 Setting the [Limit values]
n User qualification: trained user, see Ä Chapter 4.4 ‘Users' qualifications’ on page 21
Continuous display ➨ ➨ or [Limit values] ➨ [Limit values]
Settings for [Channel 2]
In its 2-channel version, the controller has two measurement channels. This descrip‐
tion for [Channel 1] applies correspondingly for the settings in [Channel 2]. The pro‐
cedure for making the settings for the channel in question is identical, however the
parameters to be set may be different. Differences are pointed out and are also
described.
Limit values
Limit value channel 1
A1011
4.1
Fig. 84: Setting the [Limit values]
11.1 Function of the limit values
The limit values are not related to the control setpoint.
The limit values are continuously compared with the measured value.
Setting the [Limit values]
120