ProMinent DULCOMETER User Manual

Limit values ch. 1
Limit value 1
A1012
4.1.5
Limit value 2
System response / hysteresis
Fig. 86: Setting Limit value channel 1
11.2.1 Setting [Limit 1]
Continuous display ➨
➨ or
[Limit values] ➨ [Limit values] ➨ or
[Limit value channel 1] ➨
[Limit ch. 1] ➨ or [Limit ch. 1] ➨
[Limit 1]
Limit 1
Function
Low limit
A1013
4.1.1.4
Value 6,00 pH
ON delay
OFF delay
No relays assigned!
Please assign in <Relays> menu.
Fig. 87: Setting Limit 1
11.2.2 Setting [Limit 2]
Continuous display ➨
➨ or
[Limit values] ➨ [Limit values] ➨ or
[Limit value channel 1] ➨
[Limit value channel 1] ➨ or [Limit 2]
➨ [Limit 2]
Limit 2
Function
High limit
A1166
4.1.3.1
Value 9.00 pH
ON delay
OFF delay
No relays assigned!
Please assign in <Relays> menu.
Fig. 88: Setting [Limit 2]
Setting the [Limit values]
123

ProMinent DULCOMETER Specifications

General

Protection Class	IP65
Measurement Parameters	pH, Conductivity, Temperature
Communication	Modbus
Power Supply	24 V DC or 100-240 V AC
Control Outputs	Relay, Analog (0/4-20 mA)
Control Functions	PID control
Input Signals	Analog (0/4-20 mA), Digital
Mounting	Wall-mounted, panel-mounted
Measurement Range pH	0-14 pH
Measurement Range Conductivity	0-2000 µS/cm