ProMinent DULCOMETER - A Complete Measuring Station May Comprise the Following

DULCOMETER
®
, Multi-parameter Controller diaLog DACa
Certificates
0 None
Documentation language***
DE German
EN English
FR French
ES Spanish
Footnotes concerning the identity code
* Selection of the measured variable during initial commissioning
** The measured variable is selected during initial commissioning or via the default
software setting.
*** Other languages are available on request.
3.1
A complete measuring sta‐
tion may comprise the fol‐
lowing:
n Measuring transducer / Controller
DACa (see identity code)
n Fitting: DGMa..., DLG III ...
n pH sensor (dependent upon the appli‐
cation)
n ORP sensor (dependent upon the
application)
n e.g. chlorine, chlorine dioxide,
chlorite, bromine, dissolved oxygen
sensor
n Transducer for pH or ORP
(dependent on the set evaluation, pH
[mA], ORP [mA])
n Sensor cable
ID Code
17