14 Setting [Digital inputs]
n User qualification: trained user, see
Ä Chapter 4.4 ‘Users' qualifications’ on page 21
Continuous display ➨ ➨ or
[Digital inputs]
➨
[Digital inputs]
Settings for [Channel 2]
In its 2-channel version, the controller has two measurement channels. This descrip‐
tion for [Channel 1] applies correspondingly for the settings in [Channel 2]. The pro‐
cedure for making the settings for the channel in question is identical, however the
parameters to be set may be different. Differences are pointed out and are also
described.
Digital Inputs
Digital input 1
A0987
7.1
Digital input 2
Off
Off
Digital input 3 Off
Digital input 4 Off
Digital input 5 Off
Fig. 96: Setting digital inputs [Dig. inputs]
14.1 Setting [Digital input 1]
Continuous display ➨ ➨ or
[Digital inputs]
➨
[Digital Inputs]
➨ or
[Digital input 1]
Setting [Digital inputs]
133