ProMinent DULCOMETER - Page 130

Settable parameters of Relay 1 and Relay 2
Parameter Settable function
[Function] Set relay as:
n
[Off]
n [Limit value 1]
n [Limit value 2]
n [Limit value 1 <Control variable>]
n [Limit value 2 <Control variable>]
n [Cycle]
n [Pulse length (PWM)]
[Assignment] Assign the relay to the relevant measuring channel:
n
[Channel 1]
n [Channel 2]
n [Channel 3]
n [channel 1+2]
n [Channel 1+2+difference]
Settable alarm relay parameters
Parameter Settable function
[Function] Set relay as:
n
[Off]
n [Alarm]
n [Limit value 1]
n [Limit value 2]
n [Limit value 1+2]
n [Pause]
Setting the [Relays]
130