EasyManua.ls Logo

Proton e.MAS 7 - Warning Information; Important Notes; Safety Precautions

Default Icon
246 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
to prevent the current from flowing out of
power battery.
The voltage wont be safe enough for
human touch until 5 minutes after the
power supply disconnection. To prevent
serious injury or death caused by
accidental contact with high-voltage
electricity, it is strictly prohibited to touch,
cut off or damage any orange high-
voltage cables or high-voltage
components.
High-voltage cables are insulated from
the metal body of the vehicle. High-
voltage electricity flows through these
cables, not through the metal body. As
the metal body is insulated from high
voltage parts, it is safe to touch the metal
vehicle body.
Warning Information
When the power system fails or the user
operates improperly, the instrument
cluster automatically displays warning
information. Please read the information
and follow its instructions. If the warning
indicators turn on, warning information is
displayed or the low-voltage battery is
faulty, the power system may not start. In
this case, try to restart the system. If the
ready for operation indicator is not on,
please contact authorised PROTON
e.MAS service outlet for maintenance.
When the collision sensor detects a
certain level of impact, the system and
high voltage current output will be
urgently cut off to minimize the risk of
electric shock. If the emergency cut-off
system is activated, the vehicle will not
be able to restart. To restart the vehicle,
please contact an authorised PROTON
e.MAS service outlet for maintenance.
The removal and replacement of any
high-voltage components in the vehicle
may affect the performance and high-
voltage safety, therefore any work
involving the removal and replacement of
high-voltage components must be the
responsibility of authorised PROTON
e.MAS service outlet.
The vehicle is equipped with high
voltage DC and AC systems as well
as 12 V low voltage system. High voltage
DC and AC equipment systems are
extremely dangerous. Serious injury or
death may occur in case of failure.
Important Notes
Inspect the tyre wear and tyre pressure
regularly as per the methods and tyre
pressure requirements recommended in
this manual.
Only use the oil and fluid recommended
in this manual and perform maintenance
according to the requirements.
Safety Precautions
Pay attention to the high-voltage cables
in orange yellow insulator in the front
compartment. Do not touch the high-
voltage components with bare hands
without disconnecting high-voltage
power. High-voltage components
include: drive motor controller, power
harness device, on-board charger, high-
voltage main cable, fast charging plug,
fast charging socket, power battery, drive
motor, slow charging socket, slow
charging plug, etc.
Notes to Users

Table of Contents