107
Leaving the Vehicle Without
Power-off
Leave the Vehicle Without
Power-off Function
Click the following on the multimedia display
in sequence: Vehicle Settings → Vehicle
Control → More, and then enable or disable
this function in this interface. After this
function is enabled, you can continue to
operate some equipment in this vehicle. Do
not leave children unattended in the vehicle.
This function will automatically turn off when
the high-voltage battery level is as low as
20%.
When the function to leave the vehicle
without power-off is enabled, if you
leave this vehicle and short press the lock
button/car search button on the intelligent
key, this vehicle will be locked but anti-theft
system will not be armed and the exterior
rearview mirror (door mirror) will not fold.
• When the function to leave the vehicle
without power-off is enabled, the driver
door status changes from close to open
status. At the same time, a warning
message will pop-up on the multimedia
display to inform the user that the
function to leave the vehicle without
power-off will continue to work. Do not
leave children unattended in the vehicle.
• When the function to leave the vehicle
without power-off is enabled and the high
voltage battery level drops to lower than
20%, the function will automatically turn
off. At the same time, a warning
message will pop-up on the multimedia
display to inform the user: the current
high voltage battery level is insufficient,
and the function has been turned off.
• When the function to leave the vehicle
without power-off is enabled and the
vehicle power mode status is in ACC
position or the hot key setting is used to
complete the time adjustment and exit
this interface. At the same time, a
warning message will pop-up on the
multimedia display to inform the user:
After the vehicle is locked, the vehicle
continues to supply power to ensure that
the air conditioning and entertainment
system can be used. If the high voltage
battery level drops lower than 20%, the
vehicle will exit this function and power
down. After the user clicks “OK”, the
pop-up window closes directly.
• When the high voltage battery level is
less than or equal to 20%, the leaving
vehicle without power-off switch turns
gray. After the user clicks the switch, a
pop-up window on the multimedia display
screen prompts: The battery level is too
low to turn on the leaving vehicle without
power-off function.
Starting and Driving
To Next Page
Loading...