Proton e.MAS 7 - Technical Data; Vehicle Identification Number

233
Vehicle Identification
Number
The vehicle identification number (VIN) is
engraved on the body cross member under
the driver seat. Move the seat backward to
the endmost position and lift up the cover to
view the VIN.
There is also a VIN on the body bracket in
the left lower corner of the windshield, which
can be seen through the windshield.
The VIN is always required when
contacting an authorised PROTON
e.MAS service outlet. If the VIN on the
vehicle body is damaged, contact an
authorised PROTON e.MAS service outlet in
time.
You can use the PROTON diagnostic
apparatus through an authorised PROTON
e.MAS service outlet to read the vehicle
identification code. Specific steps are as
follows:
1. The vehicle power mode is switched to
OFF position;
2. Connect the PROTON vehicle
diagnostic instrument to the OBD
diagnostic interface.
3. Activate the diagnosing program. Start
the vehicle, and touch “Welcome”;
4. Enter into the control module to read the
VIN.
Only an authorised PROTON e.MAS
service outlet can perform the VIN
reading as per above method. Otherwise, it
may cause damage to the vehicle.
Technical Data