174
2. Press the left area of the charging lid to
open, and remove the protective cover
of the charging port;
3. Remove the DC charging gun from the
charging pile;
4. Press the button on the DC charging
gun and insert the DC charging gun into
the DC charging port at the vehicle;
5. Complete the charging according to the
instructions stated on the charging pile.
6. After the vehicle has being fully charged
or when you need to stop charging,
follow the instructions stated on the
charging pile to complete the charging;
7. Install the protective cover of the
charging port and close the charging lid,
and put back the charging gun back to
the charging pile.
Charging Time
The charging time may be different
depending on different factors, such as the
current power level, the temperature outside
the vehicle, the usage time of the power
battery or the charging current, etc.
• If the temperature is too high or too low,
part of the charging current is used to
increase or decrease the temperature of
the power battery and the vehicle. This
may extend the charging time.
• In low temperature environments, the
charging efficiency of power battery may
decrease or the power battery cannot be
charged.
• When the charging gun is plugged for
charging at extremely low temperature,
the battery will enter a preheating stage
first, that may consume some power,
which is a normal situation. After the
preheating has completed, it will
automatically shift to a charging state.
Charging and Discharging
To Next Page
Loading...