Proton e.MAS 7 - Selection of Child Restraint

26
Selection of Child Restraint System
This vehicle is capable of supporting the following CRS:
Seat Position Number 1 2 3 4
5
Seating position
suitable for
universal belted
(Yes/No)
No No Yes No Yes
Seating position
suitable for i-
Size seat (Yes/
No)
No No Yes No Yes
Seating position
suitable for
ISOFIX lateral
fixture (L1/L2)
No No No No No
Seating position
suitable for
ISOFIX
rearward facing
fixture (R1/R2/
R3)
No No
R1, R2,
R3
No
R1, R2,
R3
Seating position
suitable for
ISOFIX forward
facing fixture
(F2/F2X/F3)
No No
F2,
F2X,
F3
No
F2,
F2X,
F3
ISOFIX CRS Size Classes and Fixtures:
• A – ISO/F3: Full-height forward facing toddler CRS;
• B – ISO/F2: Reduced-height forward facing toddler CRS;
• B1–ISO/F2x: Reduced-height forward facing toddler CRS;
• C – ISO/R3: Full-size backward facing toddler CRS;
• D – ISO/R2: Reduced-size backward toddler CRS;
• E – ISO/R1: Rearward facing infant CRS;
• F – ISO/L1: Left lateral facing position CRS (carry-cot);
• G – ISO/L2: Right lateral facing position CRS (carry-cot).
For the installation of child restraint system, if necessary, remove the head restraint and
install the child restraint system in accordance with the manual’s instruction (only
applicable to seatback with removable headrest).
Safe Travel