152
limit alarm mode and speed limit deviation
setting in this interface.
Display of Speed Limit Sign
When the vehicle reaches the area where
the speed limit sign is located, the speed
limit sign is displayed, and the display ends
after a certain distance.
If the road speed limit sign is unclear,
distorted, inclined, irregular, partially
blocked or covered, etc., the recognition of
front camera will degrade, resulting in
misrecognition or unrecognizable.
When the map data is not updated or
the positioning is inaccurate, the
speed limit sign information ahead may not
be displayed or the speed limit information
may be displayed inaccurately.
In case of other non-standard signs
and positions, it may be identified as
speed limit signs, resulting in
misrecognition. When vehicle positioning is
affected, auxiliary road speed limit signs
may be displayed when driving on the main
road.
Speed Limit Alarm
On the multimedia display, click: Vehicle
Settings → Assisted Driving → Safety
Settings → Intelligent Reminder → Speed
Limit Information Recognition in sequence,
then select the alarm mode in the speed
limit alarm interface.
No alarm: The meter instrument only
displays the speed limit sign.
Icon flashing: The speed limit sign in the
instrument cluster flashes.
Flashing icon + sound: The speed limit sign
in the meter instrument flashes
accompanied by an audible reminder.
Second Speed Limit Warning
When the vehicle speed exceeds the speed
limit value plus the deviation value
recognized by the system, a warning will be
triggered, and the system gives the first
alarm.
When the vehicle speed is less than the
speed limit plus deviation value recognized
by the system, the first warning will be
canceled.
When the vehicle speed drops to the alarm
trigger value minus 5 km/h or more, and
then the vehicle speed exceeds the alarm
trigger value again, the second alarm will be
triggered. Otherwise, the alarm will not be
Driving Assist
To Next Page
Loading...