108
• When the vehicle power supply is in ON
gear, turn the leaving vehicle without
powering-off function, and then set the
time (time > 0 min). After exiting the time
setting interface, a pop-up window
prompts on the multimedia display: It has
been set up successfully and will start
the countdown when the driver leaves
the vehicle.
• When the vehicle power supply is OFF,
the leaving vehicle without powering-off
switch turns gray, and a pop-up window
will be displayed if you click on the
multimedia display: At this time, the
vehicle is not started and this feature
cannot be used.
Service Brake
During driving, the actual braking distance
may differ due to actual road conditions,
vehicle weight and applied braking force.
You should keep a sufficient safe distance
from the preceding vehicle. Avoid
intermittent braking and emergency braking.
The first 500 kilometers is a running-in
period for a new vehicle. The braking
distance may gets longer and the braking
efficiency may be slightly poor, which is
normal. Drive carefully and keep a sufficient
safe distance when braking.
Do not install non-genuine
accessories that may affect the
vehicle performance and cause traffic
accidents.
If you press the brake pedal and a
sharp metal friction sound can be
heard, go to an authorised PROTON service
outlet for maintenance immediately.
Avoid frequent braking during driving.
Otherwise, the brake parts may
excessively wear and easily overheat
resulting in increasing the braking distance.
Starting and Driving
To Next Page
Loading...