110
• When the vehicle decelerates, a slight
feeling of halt and motor noise may
occur. This is normal.
• When the high voltage battery level is full
or the high voltage battery temperature is
too high or too low, the energy recovery
intensity will be automatically reduced to
prevent it from being damaged.
• When the motor temperature is too high,
the energy recovery intensity will be
automatically reduced to prevent it from
being damaged.
Electric Parking Brake
(EPB)
This vehicle is equipped with an electric
parking brake (EPB).
Releasing the Electric Parking Brake
(EPB)
The methods to release the electric parking
brake (EPB) are described as follows:
• Clicking the EPB button in the
multimedia display interface: Click the
following on the multimedia display in
sequence: Vehicle Settings → Driving →
Driving Scene Assistanceance. Click the
EPB button in the interface to release the
electric parking brake.
• Shifting the gear shift lever to Drive
(D) position: Make sure the driver seat
belt is fastened and the driver door is
closed; Then, move the gear shift lever to
Drive (D) position, the electric parking
brake will automatically release and the
EPB status indicator lamp in the meter
instrument will turn off.
Once the electric parking brake is
enabled, the EPB status indicator on
the meter instrument will illuminate. If the
EPB status indicator lamp does not
Starting and Driving
To Next Page
Loading...